详细说明:
PEDOT/PSS抗静电涂布液HT是基于PEDOT/PSS水分散液HT经过改性而成的**种抗静电材料。这种抗静电材料具有优异的性能:高电导率,柔韧性和透明性,因此在电子领域具有较广的应用范围,如PET,PC等表面抗静电。
PEDOT/PSS ANTISTATIC COATINGHTare antistatic materials based on PEDOT/PSS AQUEOUS DISPERSIONHT with modification of binder,solvents,accessory ingredient. The unique properties of this conductive polymer include good resistivity, flexibility and transparency, so allowing a wide range of applications in electronic field,various surfaces such as PET and polycarbonate.
技术数据Technical Data
PEDOT/PSS抗静电涂布液HTPEDOT/PSS ANTISTATIC COATINGHT
外观appearance: 水性,深蓝色
主要成分main ingredients: 树脂,PEDOT/PSS
固含量Solid content: 0.8-1.5%
酸碱性pH value: PH=8~9
粘度Viscosity:: 20-35 mPa.s
涂布量Quantity of coating used per m2: 2-4 g
表面电阻Surface resistivity: 5-7 ohm/sq
干燥条件drying condition: 80-140℃
透光率light transmission: >90%
环保性health: 不含重金属及VOC等有害物质。
使用方法Usage
本抗静电涂布液属于直接涂布类型,按照上胶量的要求设定。
注意事项:不可将此涂布液进行稀释,以及添加其他溶剂进行涂布。
本产品在使用前若放置时间较长,建议均匀搅拌使用。
Direct coating according to the quantity of coating used per m2
Note: do not dilute the coating solution, and add other solvents for coating.
If the product is placed in a long time before use, it is recommended to use uniform mixing.
包装及储存:Packaging and storage
在25℃以下贮存在原始密封容器内,放置在阴凉的地方, 避免阳光直射,保存期在6个月。使用完毕需要密封保存,避免水分及部分溶剂的挥发。
包装方式:25Kg/PE桶(特殊要求根据客户需要)
Seal storage 25, in a cool place, avoiding direct sunlight, for 6 months. The use of sealed storage to avoid water and part of the solvent evaporation.
Packing: 25Kg/PE barrel (special requirements according to customer needs)